Patch It Up Pro

Richardson 115 Low Pro Trucker Mockup and Patch Size Guide

Short answer: The Richardson 115 is a low-profile, casual structured, six-panel trucker with an adjustable snapback, precurved visor, twill front, and polyester mesh back. Because the crown is shorter than a 112, begin with a patch around 2.5 to 3 inches wide and 1.5 to 2 inches tall.

Quick specifications

Model
Richardson 115 Low Pro Trucker
Profile
Casual structured / low pro
Construction
Six panel
Fit
Adjustable snapback; manufacturer catalog lists SM and MD–LG
Visor
Precurved
Fabric
Twill / polyester mesh
Recommended patch start
2.5–3 in wide × 1.5–2 in tall

Starting patch sizes for a Richardson 115

Starting patch sizes for a Richardson 115
Patch shapeStarting sizeProduction note
Rectangle2.75 × 1.75 inBalanced on the lower crown
Circle2–2.25 in diameterKeep top edge below the crown taper
Wide wordmark3.25 × 1.25 inShort height follows the low profile
Shield2.25 × 2 inSample before a bulk run

Production recommendations

  • Reduce height first: If a design feels too large, trim height before width. The 115 has less vertical front-panel space than a Mid Pro trucker.
  • Use a 115-specific mockup: Reusing a Richardson 112 preview can overstate usable crown height.
  • Check both catalog sizes: If ordering multiple cap sizes, confirm the patch looks balanced on each physical blank.

Frequently asked questions

What is the difference between Richardson 112 and 115?
The 112 uses Richardson's Mid Pro shape. The 115 is a lower-profile casual structured trucker, so it generally needs a shorter decoration.
What size leather patch fits a Richardson 115?
Start near 2.75 × 1.75 inches for a rectangle and validate on the actual blank. Material thickness and heat-press fixture can change the safe footprint.
Should I use the same mockup for a 112 and 115?
No. The crown height and silhouette are visibly different, which affects both customer expectations and decoration placement.

Sources